Changes to Step #9

Edit by Cody Harrison —

Edit approved by Cody Harrison

Before
After
Unchanged

Step Lines

-[* 1] Attach Main Pivot Tubes to Bottom Reinforcement Plate. Leave a space of 4" between them. Use 6" bolts to bond Reinforcement plates to the Main Pivot Tubes
+[* 1] Attach Main Pivot Tubes to Quick Attach tubes. Leave a space of 4" between them. Use ~10" bolts to attach Reinforcement plates to the Main Pivot Tubes (through Quick Attach tubes)
+[* 1] Insert bolts through the tube (bolts should not pass through the 4" space between the Main Pivot Tubes because the pivot cylinders will move through this space).