Changes to Step #4

Edit by Dan Benamy —

Edit approved by Dan Benamy

Before
After
Unchanged

Step Lines

[* 1] Mount two 4x1 hole plates to end of 12-hole tube to create vertical support for Stabilizer Legs. (RobK note - check length)
[* 1] Attach using 7" bolts with two holes extended beyond the end of the 12-hole tube.
[* 1] Mount these vertical supports to Quick Attach tube. Stabilizer Legs will attach to these. (note: photo inaccurate - angled support should already be in place).
+[* 1] Note: there's a mistake in this picture! The 2 2-hole by 4-hole plates on the bottom tube hangs off the wrong way. It should hang towards the other horizontal tube.