Difficulty
Moderate
Steps
2
Time Required
00:01:30
- Module 8a + b 2 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
Quiz
0
Introduction
We are going to break down the framing into 11 framing modules that will be assembled on the ground in parallel with other construction processes.
This is the how-to for the modules of the 2nd floor. Starting from the south, they are labeled 4-9 with an "a" and "b" distinction referencing their location on either west or east respectively.
-
-
Gather materials for Mod. 8a+b
-
6: 2x4x12'
-
2: 1/2"x4'x8' Plywood
-
2: 3/4"x4'x8' OSB
-
~100: 3-1/8" construction screw
-
~100: 1-5/8" coated deck screw
-
-
-
Cut all framing members for Module 8a
-
Use two people to make the proper cuts according to the dimensions in the images.
-
Simultaneously, use the other two people in your group to assemble the framing pieces using two 3-1/8" construction screws per connection, screwing perpendicular to the bottom plate and top plate.
-
