You're viewing a previously published revision of this guide.  View latest revision

Older
Aug 07, 2014 - 02:08:34
Aug 08, 2014 - 11:08:41 Aug 08, 2014 - 11:08:26 Aug 08, 2014 - 11:08:51 Aug 08, 2014 - 11:08:37 Aug 07, 2014 - 03:08:36 Aug 07, 2014 - 03:08:27 Aug 07, 2014 - 03:08:56 Aug 07, 2014 - 03:08:13 Aug 07, 2014 - 03:08:32 Aug 07, 2014 - 03:08:53 Aug 07, 2014 - 02:08:15 Aug 07, 2014 - 02:08:56 Aug 07, 2014 - 02:08:35 Aug 07, 2014 - 02:08:47 Aug 07, 2014 - 02:08:29 Aug 07, 2014 - 02:08:56 Aug 07, 2014 - 02:08:36 Aug 07, 2014 - 02:08:17 Aug 07, 2014 - 02:08:40 Aug 07, 2014 - 02:08:26 Aug 07, 2014 - 02:08:23 Aug 07, 2014 - 02:08:14 Aug 07, 2014 - 02:08:43 Aug 07, 2014 - 02:08:01 Aug 07, 2014 - 02:08:34 Aug 07, 2014 - 02:08:02 Aug 07, 2014 - 02:08:22 Aug 07, 2014 - 02:08:06 Aug 07, 2014 - 02:08:17 Aug 07, 2014 - 02:08:01 Aug 07, 2014 - 02:08:07 Aug 07, 2014 - 02:08:34 Aug 07, 2014 - 02:08:05 Aug 07, 2014 - 02:08:22 Aug 07, 2014 - 01:08:40 Aug 07, 2014 - 01:08:37 Aug 07, 2014 - 01:08:25 Aug 07, 2014 - 01:08:25 Aug 07, 2014 - 01:08:12 Aug 07, 2014 - 01:08:52 Aug 07, 2014 - 01:08:35 Aug 07, 2014 - 12:08:01 Aug 07, 2014 - 12:08:39 Aug 07, 2014 - 12:08:18 Aug 07, 2014 - 12:08:37 Aug 07, 2014 - 12:08:54 Aug 07, 2014 - 12:08:13 Aug 07, 2014 - 12:08:08 Aug 07, 2014 - 12:08:11 Aug 07, 2014 - 12:08:54 Aug 07, 2014 - 11:08:11
Newer

Installing MicroHouse 3 Walls Module 2a+b

Written By: Workshop One (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

3

Time Required

00:01:30

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Quiz

0

Introduction

We are going to break down the framing into 3 framing modules that will be assembled on the ground in parallel with other construction processes.

This is the how-to for the first modules of the 1st floor. Starting from the south, they are labeled 1-10 with an "a" and "b" distinction referencing their location on either west or east respectively.

  1. Gather materials for Mod. 2a+b 4: 2"x4"x6' studs

    • Gather materials for Mod. 2a+b

    • 4: 2"x4"x6' studs

    • 3: 2"x4"x8'

    • 1: 3/4"x4'x8'

    • 1: 1/2"x4'x8'

    • ~20: 3-1/8" construction screw

    • ~20: 1-5/8" coated deck screw

  2. Use two people to make the proper cuts at the dimensions in the graphic at a 17 degree angle on the miter saw. Simultaneously, use the other two people in your group to assemble the framing pieces using two 3-1/8" construction screws per connection, screwing perpendicular to the bottom plate and top diagonal pieces.

    • Use two people to make the proper cuts at the dimensions in the graphic at a 17 degree angle on the miter saw.

    • Simultaneously, use the other two people in your group to assemble the framing pieces using two 3-1/8" construction screws per connection, screwing perpendicular to the bottom plate and top diagonal pieces.

  3. Exterior Sheathing for Module 2a Cut the 17 degree angle on the piece by marking the two vertical distances and snapping a guide chalk line to connect the two. Use a 7-1/4"circular saw to make the cut.

    • Exterior Sheathing for Module 2a

    • Cut the 17 degree angle on the piece by marking the two vertical distances and snapping a guide chalk line to connect the two. Use a 7-1/4"circular saw to make the cut.

Author

with 1 other contributor

Workshop One

Member since: 4/19/14

4 Reputation

6 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 269