You're viewing a previously published revision of this guide.  View latest revision

Older
Aug 07, 2014 - 08:08:28
Aug 08, 2014 - 11:08:20 Aug 08, 2014 - 11:08:23 Aug 07, 2014 - 11:08:37 Aug 07, 2014 - 03:08:55 Aug 07, 2014 - 03:08:15 Aug 07, 2014 - 03:08:09 Aug 07, 2014 - 02:08:10 Aug 07, 2014 - 02:08:51 Aug 07, 2014 - 02:08:32 Aug 07, 2014 - 02:08:46 Aug 07, 2014 - 02:08:51 Aug 07, 2014 - 02:08:42 Aug 07, 2014 - 02:08:16 Aug 07, 2014 - 01:08:20 Aug 07, 2014 - 01:08:12 Aug 07, 2014 - 01:08:18 Aug 07, 2014 - 01:08:54 Aug 07, 2014 - 01:08:25 Aug 07, 2014 - 11:08:56 Aug 07, 2014 - 11:08:57 Aug 07, 2014 - 11:08:05 Aug 07, 2014 - 11:08:25 Aug 07, 2014 - 11:08:35 Aug 07, 2014 - 10:08:13 Aug 07, 2014 - 10:08:42 Aug 07, 2014 - 10:08:26 Aug 07, 2014 - 10:08:55 Aug 07, 2014 - 10:08:03 Aug 07, 2014 - 10:08:22 Aug 07, 2014 - 09:08:32 Aug 07, 2014 - 09:08:47 Aug 07, 2014 - 09:08:54 Aug 07, 2014 - 09:08:02 Aug 07, 2014 - 09:08:03 Aug 07, 2014 - 09:08:26 Aug 07, 2014 - 08:08:55 Aug 07, 2014 - 08:08:28 Aug 07, 2014 - 08:08:46 Aug 07, 2014 - 08:08:53 Aug 07, 2014 - 08:08:14 Aug 07, 2014 - 08:08:47 Aug 07, 2014 - 08:08:35 Aug 07, 2014 - 08:08:35 Aug 07, 2014 - 08:08:20 Aug 07, 2014 - 12:08:46 Aug 07, 2014 - 12:08:36 Aug 07, 2014 - 12:08:34 Aug 07, 2014 - 12:08:39 Aug 07, 2014 - 12:08:56 Aug 07, 2014 - 12:08:16 Aug 06, 2014 - 11:08:48 Aug 06, 2014 - 11:08:20 Aug 06, 2014 - 11:08:28 Aug 06, 2014 - 01:08:18 Aug 06, 2014 - 11:08:35 Aug 06, 2014 - 10:08:53
Newer

Module 1a+b

Written By: Workshop One (and 2 other contributors)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

3

Time Required

00:01:30

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Quiz

0

Introduction

We are going to break down the framing into 3 framing modules that will be assembled on the ground in parallel with other construction processes.

This is the how-to for the first modules of the 1st floor. Starting from the south, they are labeled 1-10 with an "a" and "b" distinction referencing their location on either west or east respectively.

  1. Gather materials for Mod. 1a 4:2x4x6'

    • Gather materials for Mod. 1a

    • 4:2x4x6'

    • 1/2 sheet of 3/4"x4'x8' OSB (other 1/2 will be used for Mod. 1b)

    • 1/2 sheet of 1/2"x4'x8' plywood (other 1/2 will be used for Mod. 1b)

    • 16: 3-1/8" construction screw

    • 32: 1-5/8" coated deck screw

  2. Use two people to make the proper cuts at the dimensions in the graphic at a 17 degree angle Simultaneously, use the other two people in your group to assemble the framing pieces using two 3-1/8" construction screws per connection, screwing perpendicular to the bottom plate and top diagonal pieces.

    • Use two people to make the proper cuts at the dimensions in the graphic at a 17 degree angle

    • Simultaneously, use the other two people in your group to assemble the framing pieces using two 3-1/8" construction screws per connection, screwing perpendicular to the bottom plate and top diagonal pieces.

  3. Exterior Sheathing for Module 1a Cut the 3/4" OSB at 3' parallel to the short side of the piece to keep the rest for future use for Mod. 1b and the small 1" wide pieces in this module

    • Exterior Sheathing for Module 1a

    • Cut the 3/4" OSB at 3' parallel to the short side of the piece to keep the rest for future use for Mod. 1b and the small 1" wide pieces in this module

    • Cut the 17 degree angle on the 3' piece by marking the two vertical distances and snapping a guide chalk line to connect the two.

    • repeat above procedure for the smaller piece of module

    • remember that the "scraps" from this 3/4"x4'x8' sheet will be used for the exterior sheathing for Mod. 1b

Author

with 2 other contributors

Workshop One

Member since: 4/19/14

4 Reputation

6 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 9

All Time: 496