Difficulty
Moderate
Steps
2
Time Required
- Ladder 2 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
Private
This guide will not appear in search results and can only be viewed by team members!
-
-
Cut two 4x4's to 87" in length.
-
Mark the first side with the square, then use that line to transfer the mark to the other sides.
-
-
-
Mark 1/2" from the end of each 4x4.
-
Transfer the line to two of the other sides in a similar manner to step 1.
-
Set your circular saw blade to a 45 degree angle as seen in photo 2.
-
Bevel 3 of the sides by using the angled blade to cut along the line. The result will look like photo 3.
-
The fourth side does not get beveled because it lays flush against the wall.
-
