Difficulty
Moderate
Steps
0
Time Required
Sections
0
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Introduction
I envision a baler with a header that attaches to the arms of the Lifetrac, thus enabling the elevation of the pick-up header to be adjusted per field terrain as necessary. The baler plunger and bale tying apparatus will bolt or pin to the right side of the Lifetrac with the bales ejecting to the rear of the machine.
Tools
Parts
No parts specified.
Almost done!
Finish Line
0 Comments