You're viewing a previously published revision of this guide.  View latest revision

Older
Nov 19, 2013 - 07:11:31
Nov 26, 2013 - 06:11:03 Nov 26, 2013 - 06:11:47 Nov 26, 2013 - 06:11:47 Nov 26, 2013 - 06:11:45 Nov 26, 2013 - 06:11:45 Nov 26, 2013 - 09:11:33 Nov 26, 2013 - 09:11:46 Nov 19, 2013 - 09:11:25 Nov 19, 2013 - 09:11:48 Nov 19, 2013 - 09:11:38 Nov 19, 2013 - 09:11:21 Nov 19, 2013 - 09:11:02 Nov 19, 2013 - 08:11:27 Nov 19, 2013 - 08:11:54 Nov 19, 2013 - 08:11:11 Nov 19, 2013 - 08:11:39 Nov 19, 2013 - 08:11:55 Nov 19, 2013 - 08:11:25 Nov 19, 2013 - 08:11:01 Nov 19, 2013 - 08:11:04 Nov 19, 2013 - 08:11:54 Nov 19, 2013 - 08:11:33 Nov 19, 2013 - 08:11:17 Nov 19, 2013 - 08:11:03 Nov 19, 2013 - 08:11:46 Nov 19, 2013 - 07:11:58 Nov 19, 2013 - 07:11:43 Nov 19, 2013 - 07:11:25 Nov 19, 2013 - 07:11:08 Nov 19, 2013 - 07:11:52 Nov 19, 2013 - 07:11:32 Nov 19, 2013 - 07:11:17 Nov 19, 2013 - 07:11:02 Nov 19, 2013 - 07:11:37 Nov 19, 2013 - 07:11:58 Nov 19, 2013 - 07:11:31 Nov 19, 2013 - 07:11:13 Nov 19, 2013 - 07:11:52 Nov 19, 2013 - 07:11:21 Nov 19, 2013 - 07:11:08 Nov 18, 2013 - 04:11:58 Nov 18, 2013 - 02:11:33 Nov 18, 2013 - 11:11:26 Nov 18, 2013 - 10:11:00 Nov 18, 2013 - 10:11:43 Nov 18, 2013 - 10:11:22 Nov 18, 2013 - 10:11:53 Nov 18, 2013 - 10:11:37 Nov 18, 2013 - 09:11:09 Nov 18, 2013 - 09:11:58 Nov 18, 2013 - 09:11:44 Nov 18, 2013 - 09:11:05 Nov 18, 2013 - 08:11:12 Nov 17, 2013 - 07:11:24 Nov 17, 2013 - 06:11:49 Nov 17, 2013 - 04:11:14 Nov 17, 2013 - 04:11:29 Nov 17, 2013 - 04:11:00 Nov 17, 2013 - 04:11:44 Nov 17, 2013 - 04:11:37 Nov 17, 2013 - 04:11:53 Nov 17, 2013 - 04:11:17 Nov 17, 2013 - 04:11:45 Nov 17, 2013 - 03:11:41 Nov 17, 2013 - 03:11:44 Nov 17, 2013 - 03:11:24 Nov 17, 2013 - 03:11:01 Nov 17, 2013 - 03:11:53 Nov 17, 2013 - 03:11:56 Nov 17, 2013 - 03:11:14 Nov 17, 2013 - 03:11:32 Nov 17, 2013 - 03:11:06 Nov 17, 2013 - 03:11:14 Nov 17, 2013 - 03:11:55 Nov 17, 2013 - 03:11:14 Nov 17, 2013 - 03:11:29 Nov 17, 2013 - 03:11:49 Nov 17, 2013 - 03:11:51 Nov 17, 2013 - 03:11:13 Nov 17, 2013 - 03:11:50 Nov 17, 2013 - 03:11:12 Nov 17, 2013 - 03:11:58 Nov 17, 2013 - 03:11:57 Nov 17, 2013 - 03:11:23 Nov 17, 2013 - 03:11:41 Nov 17, 2013 - 12:11:04 Nov 17, 2013 - 12:11:14 Nov 17, 2013 - 11:11:06 Nov 17, 2013 - 11:11:40 Nov 17, 2013 - 11:11:05 Nov 17, 2013 - 10:11:27 Nov 17, 2013 - 10:11:05 Nov 17, 2013 - 10:11:40 Nov 17, 2013 - 10:11:00 Nov 17, 2013 - 10:11:11
Newer

How to build the Trencher Rotor Module

Written By: Chris Reinhart (and 3 other contributors)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

16

Time Required

Suggest a time??

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Quiz

0

  1. Attach bearing to "middle plate" (insert part number) as shown in image. Be mindful of orientation of grease zerk relative to plate. Must remain accessible once unit is fully assembled.

    • Attach bearing to "middle plate" (insert part number) as shown in image.

    • Be mindful of orientation of grease zerk relative to plate. Must remain accessible once unit is fully assembled.

  2. Attach bearing to "large bearing plate" (insert part number). This bearing faces inside the mount - towards the other bearing.

    • Attach bearing to "large bearing plate" (insert part number). This bearing faces inside the mount - towards the other bearing.

  3. Attach motor to plate. (insert part number) Attach motor to plate. (insert part number) Attach motor to plate. (insert part number)

    • Attach motor to plate. (insert part number)

  4. Place hub. Insert nut and pin to hold in place. Place hub. Insert nut and pin to hold in place. Place hub. Insert nut and pin to hold in place.

    • Place hub. Insert nut and pin to hold in place.

  5. Info about the hub to plate or something Should this be earlier? Should this be earlier?

    • Info about the hub to plate or something

    • Should this be earlier?

  6. Place hub-to-chain-link coupler. Tighten nuts in a star pattern. Tighten nuts in a star pattern.

    • Place hub-to-chain-link coupler.

    • Tighten nuts in a star pattern.

  7. Cut 3" shaft with bandsaw Mill hole Mill hole

    • Cut 3" shaft with bandsaw

    • Mill hole

  8. Mill slot in shaft Mill slot in shaft

    • Mill slot in shaft

  9. Step 9 Step 9 Step 9

    • Step 9

  10. Step 10

    • Step 10

  11. Step 11 Step 11 Step 11

    • Step 11

  12. Insert wisdom here. Insert wisdom here.

    • Insert wisdom here.

  13. Insert wisdom here. Insert wisdom here.

    • Insert wisdom here.

  14. Insert wisdom here.

    • Insert wisdom here.

  15. Insert wisdom here.

    • Insert wisdom here.

  16. Insert wisdom here.

    • Insert wisdom here.

Author

with 3 other contributors

Chris Reinhart

Member since: 10/29/13

2,118 Reputation

18 Guides authored

View Statistics:

Past 24 Hours: 12

Past 7 Days: 120

Past 30 Days: 436

All Time: 4,056