Difficulty
Moderate
Steps
1
Time Required
- CEB: Hopper Mounting Plate 1 step
User-Contributed Guide
This guide is not managed by the site's staff.
Quiz
0
Introduction
Tools
Parts
No parts specified.
-
-
Punch the holes in the 15" pieces. They are both the same.
-
Weld the pieces together, insuring everything is square.
-
There should be a 6" space between the 15" pieces.
-
Skip around so the plate doesnt warp.
-
Weld both sides on all seams
-
Grind away the welds on one side of the plate.
-
