Skip to main content

Site Navigation

Your Account

Choose Language


Time Estimate

Select a difficulty level for this entire task (including any prerequisite instructions). The difficulty ranking reflects the experience, physical dexterity, and risk involved.

Very easy

Does not require opening device.


Requires minimal disassembly and requires only basic tools like a Phillips or flat-head screwdriver.


Requires a fair amount of disassembly. This is a task that most people would not perform without instruction.


Requires significant disassembly and may require specialized tasks like soldering.

Very difficult

This task is considered quite challenging, may require specialized tasks like micro-soldering, and may risk damage to the device. If you can do this, people may call you MacGyver on occasion.

If your guide picks up where an existing guide leaves off, add the existing guide as a prerequisite to avoid having to write additional steps. Prerequisite guides will be displayed before this guide. Make sure that the prerequisite guides are in the correct order. You can change the prerequisite order by dragging the icons to the left of the guide's name.

  • 1 × Angle grinder
  • 1 × c clamps
  • 1 × Spray paint
  • 1 × torch
  • 1 × various wrenches
  • 1 × Vise clamps
  • 1 × Welder
  • 10 × 3/4" galvanized nuts4 for hopper mount 4 for mounting the shaker, 2 for the bottom on grate supports
  • 2 × 1/2" lock nutsfor the grate to hopper supports
  • 2 × 1/2" nutsfor the hopper to hopper supports
  • 8 × 3/4"x1.5" bolts4 for hopper mounting plate, 2 for shaker mount, 2 for grate supports
  • 2 × 3/4"x2.5" boltsfor top of grate supports to grate
  • 2 × 1/2"x2.5" boltsfor grate to hopper supports
  • 2 × 1/2"x3" boltfor hopper to hopper supports
  • 8 × 1/2" washers4 for hopper to hopper supports, 4 for grate to hopper supports
  • 6 × 3/4" washers4 for grate to hopper supports, 2 for grate to grate supports
  • 4 × 1/2"x1" BoltsFor dirt deflector to grate
Add New