Place the shaker onto the bolts already welded to the hopper supports.
Clamp the other side to the hopper support.
Use a square to make sure the shaker mount is square with the hopper supports.
Tighten nuts onto the side with the welded bolts.
Tack the bolts to the hopper support.
Make sure you tack them to the hopper support, NOT the shaker mount.
Tack as much as you can from this position.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.