/
/

Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by Catarina Mota —

Edit approved by Catarina Mota

Before
After
Unchanged

Step Lines

[* black] Create three "caps" using one of the methods shown in the image.
-[* black] Cut one piece of OSB to size, then reinforce with 2 long 2x4s laying flat on the outer edges. The 2x4 pieces should be 3' 9 1/2" long. Fill in blocks in between the long 2x4s. Screw in two more 2x4, 15" long, on top of the long edge 2x4s - to create a effective handles. The project past the edge and come to rest on the foundation forms.
+[* black] Cut one piece of OSB to size, then reinforce with 2 long 2x4s laying flat on the outer edges. The 2x4 pieces should be 3' 9 1/2" long. Fill in blocks in between the long 2x4s. Screw in two more 2x4, 15" long, on top of the long edge 2x4s - to create effective handles. The project past the edge and come to rest on the foundation forms.
[* black] Alternative method is to layer up three sheets of 1/2" OSB or plywood.