/
/

Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by Marcin —

Edit approved by Marcin

Before
After
Unchanged

Step Lines

[* black] Create three "caps" like the image at left. These are 12" wide, 3' - 8" long, and 1 1/2" tall.
-[* black] The easiest way to make it is to build up three layers of OSB or plywood to create those dimensions.
+[* black] Cut one piece of OSB to size, then reinforce with 2 long 2x4s laying flat on the outer edges. The 2x4 pieces should be 3'8" long. Screw in a second 2x4, 12" long, on top of the long edge 2x4s - to create an effective handle.