Changes to Step #11
Edit by Chris Reinhart —
Edit approved by Chris Reinhart
- Before
- After
- Unchanged
Step Lines
| - | [* black] Create three "caps" like the image at left. These are 12" wide, 3' - 9 1/2" long, and 1 1/2" tall. |
|---|---|
| - | [* black] Cut one piece of OSB to size, then reinforce with 2 long 2x4s laying flat on the outer edges. The 2x4 pieces should be 3'8" long. Screw in a second 2x4, 12" long, on top of the long edge 2x4s - to create an effective handle. |
| + | [* black] Create three "caps" using one of the methods shown in the image. |
| + | [* black] Cut one piece of OSB to size, then reinforce with 2 long 2x4s laying flat on the outer edges. The 2x4 pieces should be 3' 9 1/2" long. Fill in blocks in between the long 2x4s. Screw in two more 2x4, 15" long, on top of the long edge 2x4s - to create a effective handles. The project past the edge and come to rest on the foundation forms. |
| + | [* black] Alternative method is to layer up three sheets of 1/2" OSB or plywood. |
Image 1
Old Version
New Version