Changes to Step #8
Edit by Chris Reinhart —
Edit approved by Chris Reinhart
- Before
- After
- Unchanged
Step Lines
| + | [* black] Once you have the forms staked and the all-thread in place, you can lay the long pieces of rebar into the forms. These pieces rest on the all-thread which holds them halfway up the thickness of the foundation. |
|---|---|
| + | [* black] The rebar should be placed at the 1/3 points side-to-side of the foundation. Since the foundation is 12" wide, this means that the rebar is located 4" in from each side. |
| + | [* black] Tying the rebar to the all-thread with metal wire will hold it in place and make sure it does not get moved around as the concrete is poured. |
Image 1
No previous image
Added