Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Dan Benamy

Edit approved by Dan Benamy

Before
After
Unchanged

Step Lines

-[* black] Add the tube on which you will rest metal that's being fed to the shears: Bolt 2 6"x1" bolts though washers, through holes 2 and 5 of a 6 hole tube, and into a 4 hole tube. Put the nuts on the inside of the 4 hole tube.
+[* black] Parts:
+ [* black] 1 4 hole, 0.25" tube
+ [* black] 2 1" x 6" bolts
+ [* black] 2 1" washers
+ [* black] 2 1" nuts
+[* black] Put the bolts though washers, holes 2 and 5 of the 6 hole tube that's not touching the springs, and into the end holes of the 4 hole tube. Put the nuts on the inside of the 4 hole tube.
+[* black] TODO pic of bolts going in