Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Dan Benamy

Edit approved by Dan Benamy

Before
After
Unchanged

Step Lines

-[* black] Put nuts on the bolts that are sticking up. The nuts should be about 1/2" below the level of the table with the springs we have. Put washers on top of the nuts.
+[* black] Put nuts on the bolts that are sticking up, about 2 inches above the cubes. Put washers on top of the nuts.
+[* black] Put springs over the bolts and then another pair of washers.