How to assemble the shear table of the Ironworker (in progress) Step #2 History

Changes to Step #2

Edit by Dan Benamy — Sun 27 Oct 2013 10:15:04 PM MST

Edit approved by Dan Benamy

-	[* black] Put nuts on the bolts that are sticking up. The nuts should be ~~at about~~ the level of the table. Put washers on top of the nuts.
+	[* black] Put nuts on the bolts that are sticking up. The nuts should be about 1/2" below the level of the table with the springs we have. Put washers on top of the nuts.