Changes to Step #2

Edit by Dan Benamy

Edit approved by Dan Benamy


Step Lines

[* black] Parts:
[* black] 4 2 hole x 4 hole plates
[* black] 6 1" x 8" bolts
[* black] 6 1" nuts
[* black] Put the bolts through 2 plates, through the frame tubes, through the other 2 plates, and loosely put on nuts.
[* black] The last two holes of the plates should extend past the end of the tubes.
+[* black] These plates show an extra nut welded on. You can ignore that for now; you'll do that in the next steps.