Changes to Step #12
Edit by Dan Benamy —
Edit approved by Dan Benamy
- Before
- After
- Unchanged
Step Lines
| [* black] Parts: | |
| - | [* black] |
| + | [* black] 2 ounces of grease (I made up 2 oz, Marcin should verify) |
| [* black] Apply grease to both sides of the top (round) part of the pivot plates and inside the bushing (hole). Squeeze some out using the gun and then smear it around. | |
| + | [* black] TODO pictures of greasing on camera |