Changes to Step #10
Edit by jeanbaptiste —
Edit approved by jeanbaptiste
- Before
- After
- Unchanged
Step Lines
| [* black] Parts: | |
| - | [* black] |
| - | [* black] |
| + | [* black] 8 1" Bolts |
| + | [* black] 4 Pivot Plates |
| [* black] Grease | |
| [* black] Put two Pivot Plates on both sides of the two and install Bolts with nuts. Leave finger tight. | |
| + | [* black] put grease inside the bushing and on the flat part where the hole is round (see picture) |