Changes to Step #10
Edit by Dan Benamy —
Edit approved by Dan Benamy
- Before
- After
- Unchanged
Step Lines
| [* black] Parts: | |
| [* black] 8 1" nuts | |
| - | [* black] 4 pivot plates (TODO link to guide on making them) |
| + | [* black] 4 pivot plates (TODO link to guide on making them) (for the ironworker, it's very important that the plates be perfectly flat against each other. If there are any bumps, grind them down.) |
| [* black] Put two pivot plates on each sides of the frame tubes, over the 4 threaded rods, and fasten them with nuts. Leave the nuts very loose. |
Image 3
No previous image
Added