Changes to Step #23
Edit by Dan Benamy —
Edit approved by Dan Benamy
- Before
- After
- Unchanged
Step Lines
| - | [* black] Parts: |
|---|---|
| - | [* black] 2 1" washers |
| - | [* black] 2 1" nuts |
| [* black] Put the table assembly threaded rods through the frame from the side with the lower blade. They should go through the holes on either side of the lower blade plate. | |
| - | [* black] Put a washer and nut on the end of each. |
Image 2
Deleted
Image 3
Deleted