How to assemble all the pieces of the Ironworker (in progress) Step #4 History

Changes to Step #4

Edit by Dan Benamy — Sun 27 Oct 2013 10:58:25 PM MST

Edit approved by Dan Benamy

	[* black] Parts:
	[* black] 1 10" x 1" hardened bolt
	[* black] 1 1" nut
	[* black] 4 1" washers (spacers)
-	[* black] Put a bolt through ~~the~~ drilled out nut, the bottom hole of the plates on the frame, 2 washers, the piston side of the cylinder, 2 more washers, the other plates, and ~~the other~~ drilled out nut. Make sure the hose connectors on the hydraulic cylinder face away from the rest of the ironworker.
+	[* black] Put a bolt through a drilled out nut, the bottom hole of the plates on the frame, 2 washers, the piston side of the cylinder, 2 more washers, the other plates, and another drilled out nut. Make sure the hose connectors on the hydraulic cylinder face away from the rest of the ironworker.
	[* black] TODO better 1st pic
	[* black] Put a nut on the bolt but don't tighten all the way.
	[* black] If you have trouble getting the bolt through, try using an impact wrench to drive it through. If that doesn't work, it may help to loosen the plates with the welded nuts. Make sure not to put in too many spacers while they're loose and to tighten them when you're done.