Changes to Step #4
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
+ | [title] Torching |
---|---|
+ | [* black] Torch out the hole, and grind away the slag. |
+ | [* black] Insure the tubing will go thru each hole. If not, retorch it. Grind off the slag. |
+ | [* black] Lay the cylinder back down, with the 1/8" spacer in, and replace the crossmembers, with their bolts. Place the tubing in the torched holes. |
+ | [* black] Insure the pin will go thru the tubing and the cylinder. If not, retorch the holes so that it will. |
Image 1
No previous image
Added
Image 2
No previous image
Added