Changes to Step #10
Edit by Cody Harrison —
Edit approved by Cody Harrison
- Before
- After
- Unchanged
Step Lines
| - | [* 1] add info for Step 14 |
|---|---|
| + | [* 1] Attach 4 pivot plates and five 1x2 hole plates as spacers between Reinforcement plate and pivot tubes. Use ~6" bolts |
| + | [* 1] Nuts will be mounted to the inside of pivot tubes. Hold the nut inside the tube (with a vice if necessary) while screwing in the bolts. Tighten with impact driver |