Changes to Step #6
Edit by Cody Harrison —
Edit approved by Cody Harrison
- Before
- After
- Unchanged
Step Lines
| - | [* black] Mount the Leg Cylinders to the plates at top and bottom using 4 11" bolts. |
|---|---|
| - | [* black] Mount the Leg Cylinders to the plates at top and bottom using 4 11" bolts. |
| + | [* black] Mount 2x1 hole plate at the top of each vertical leg stabilizer tube using a bolt to attach to the tube and a pin to the right of that, which the cylinder will rotate on. |
| + | [* black] Next attach a 2x2 hole plate to the 4th and 5th holes of the stabilizer legs. |
| + | [* black] Mount the Leg Cylinders to the plates at top and bottom using four 11" bolts. |