Changes to Step #1
Edit by Robert Kirk —
Edit approved by Robert Kirk
- Before
- After
- Unchanged
Step Lines
| - | [* black] Remember the journey of 1000 miles begins with a single step. |
|---|---|
| - | [* black] And we can... |
| - | [* black] add more lines... |
| - | [* black] Take 4 12 hole tubes. 2 of these are the Leg Cylinder Tubes, and 2 are the quick attach plate tubes. |
| + | [* black] Take four 12-hole steel tubes. Two of these are the Stablilzer Leg Tubes and two will be used to mount the Quick Attach. |
| + | [* black] Mount two 3x1 hole plate on both ends of one 12-hole tube with 7" bolts, lock washer and nuts. This will be the bottom of the Quick Attach plate. |
| + | [* black] Mount two 2x3 hole plates to the ends of the other 12-hole tube using 7" bolts and nuts. This will be the Quick Attach plate to . Use only the 2 inner holes, as the third hole will be used to mount the Stabilizer Legs. |