Changes to Step #1
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [title] Prepare the hammer |
|---|---|
| + | [* black] Drill or punch the hole in the flatbar. |
| + | [* black] Weld the two pieces of flatbar together. |
| + | [* icon_caution] This needs to be a really strong weld! The hammer will be under a lot of stress, and if it's not a solid weld, it could fly off! (This is why the guard is there.) |
| + | [* black] Tack the shaft into the hole so there's about a 1/4" distance between the end of the shaft and the opposite side of the hammer. |
Image 1
No previous image
Added
Image 2
No previous image
Added