Changes to Step #3
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [* black] Try to slide the drawer in and out. If the drawer gets stuck somewhere, investigate and find where it's hitting. (It almost certainly will). |
|---|---|
| + | [* black] You'll probably need to loosen one, or both of the drawer members and move it up a bit. |
| + | [* green] This can be done uniformly using cardboard shims. See photo. Place the shim between the drawer and the crossmember. Tighten the bolts again. Remove the shims by "jiggling" the drawer. |
| + | [* black] If it's hitting a spacer, grind down the spacer. |
| + | [* black] If the drawer itself is prohibitive in some spots, it wasn't grinded evenly. Grind down the high spots. |
Image 1
No previous image
Added