Changes to Step #1
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [title] Weld The Spacers |
|---|---|
| + | [* black] Lay the frame on it's side. |
| + | [* black] Protect the cylinder and press feet so that when you weld, spatter won't stick. You could use some piece of metal or a nonflammable cloth. |
| + | [* black] On the inside, bottom edge, weld the interior of the spacer inwards as far as you can. This should be an inch or more. Do this in all 4 corners accessable from this side of the frame. See the photo. |
| + | [* black] Weld the top 100%, and grind it flush. |
| + | [* black] Flip over the frame. |
| + | [* black] Weld this side as you did the other side, also welding inside the spacers. |
Image 1
No previous image
Added