Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

[title] Weld the magnet holder nut
[* black] Weld the nut in the corner of the lower press plate, as shown. This should be on the opposite side of the ports of the cylinder, flush with the press foot, and as near to the corner as you can get it. It can even hang off a bit.
[* black] Make sure you protect the threads.

Image 1

No previous image

Added

Image 2

No previous image

Added