Changes to Step #6
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [* black] Lower the cylinder and flip it upside down. |
|---|---|
| + | [* black] Fill in the bottom side of it with welds. |
| + | [* green] This will require many layers of welds and many dunks to cool it. |
| + | [* black] Grind it flush with the rest of the plate. A few spots where the welds are below the surface is OK, but the majority of the surface should be level. |
Image 1
No previous image
Added