Changes to Step #2
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [title] Install the Couplers |
|---|---|
| + | [* black] Remove the plugs on the cylinder. |
| + | [* black] The Prince brand cylinder uses a really large allen wrench for their plugs. If you can't find one, you can make one like we did. |
| + | [* black] Make sure the ports are facing up as there might be fluid in the cylinder and you don't want it to leak. |
| + | [* black] Tighten the coupler assembly into the holes, so that when the cylinder is lying on its side, niether one will hit the table. |
Image 1
No previous image
Added
Image 2
No previous image
Added