Skip to main content

Changes to Step #1

Edit by Dozuki System

Edit approved by Dozuki System


Step Lines

+[title] Prepare the Hydraulic Couplers
+[* green] Thread tape is necessary between each connection. Always wrap thread tape clockwise when facing the threaded portion.
+[* black] You will need to make 2 of these, one with male quick couplers and one with a female.
+[* black] Put the hex nipple in the vise and tighten the quick coupler onto it. Put the elbow in the vise, male side up, and tighten the bushing onto it.
+[* black] Rotate the elbow in the vise and tighten the quick coupler/ nipple onto it.

Image 1

No previous image