Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

[title] Prepare the drawer members.
[* black] Mark and center punch the 4 holes on the face of the U-channel.
[* black] DON'T PUNCH THEM! They will be mag-drilled later
[* black] Torch holes for 3/4" drawer adjustment bolts as shown in the diagram.
[* black] Grind away the slag.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added