Changes to Step #3
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [* black] Ensure that the hammer rotates freely still. |
|---|---|
| + | [* black] It may require some force, but shouldn't need much. |
| + | [* black] If the hammer won't rotate, loosen the motor mount bolts, retighten them, and recheck it. |
| + | [* black] Position the other bearing and tighten it down, still ensuring that it will rotate without much force. |
| + | [* black] Lock the eccentrics by pushing them towards the lip on the bearing and twisting it. |
| + | [* black] Tighten the set screw on the eccentrics. |
Image 1
No previous image
Added