Changes to Step #1
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [title] Weld Press Plate to Spacer |
|---|---|
| + | [* black] Lay the spacer tube on top of the press plate, align the sides and make the back edge flush. |
| + | [* red] Insure all edges are tight and squared; this piece is critical, it must be a uniform height throughout the entire item. Grind off any imperfections. |
| + | [* black] Tack weld the two together in many places (at least 3 on each seam). |
| + | [* red] Double check everything for squareness!! |
| + | [* black] Weld the two together on all edges where they touch |
| + | [* green] It is a good idea to weld in 1” or 2” increments, skipping around to different places to prevent warpage. You will need to weld multiple layers where the tubing is rounded. |
Image 1
No previous image
Added
Image 2
No previous image
Added