Skip to main content

Changes to Step #1

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

+[title] Make the Hopper Supports
+[* black] Torch away the necessary areas. See diagrams.
+ [* black] The holes for the hopper mounting need to be 28" away from the bottom side. Mark 28" on the opposite tubing walls and torch 1/2" holes. Insure a 1/2" bolt goes all the way thru.
+ [* black] Torch the cutaway at the top and the slot.
+[* black] Grind away any slag.

Image 1

No previous image

Added

Image 2

No previous image

Added