Changes to Step #4
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [title] Make Controller Plate |
|---|---|
| + | [* black] Find your controller box and locate its mounting holes on the back. |
| + | [* black] Place it on top of the 6x15 plate so it is square and the top hole is about ½” away from the top. Transfer punch the holes on the controller box to the plate. |
| + | [* black] Drill those 1/4" holes. |
| + | [* black] You can drill them a little bigger (up to 5/16") if you'd like, as it's difficult to get the holes perfectly aligned. |
| + | [* black] Punch the holes in the bottom piece. |
Image 1
No previous image
Added