Changes to Step #3
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [title] Torch the Remaining Holes |
|---|---|
| + | [* black] Torch the hole for mounting the motor in the 8" piece of 4x4 angle. Grind off the slag. |
| + | [* black] Double check that the hole is large enough by putting on the motor and making sure the raised portion in the center goes all the way thru. |
| + | [* black] You can torch separate holes for the bolts, or do one large, odd shaped one like is pictured. |
| + | [* black] Torch whichever holes you couldn't access with the punch |
Image 1
No previous image
Added
Image 2
No previous image
Added