Changes to Step #3
Edit by Workshop One —
Edit approved by Workshop One
- Before
- After
- Unchanged
Step Lines
| + | [* black] ***Assemble Framing*** |
|---|---|
| + | [* black] Place vertical studs (60-5/8") inside horizontal top and bottom plates (48-3/4") |
| + | [* black] Sandwich plywood strip between two of the three 33" pieces and screw together (three screws across length is fine) |
| + | [* black] Use sandwich to form top of window box, use 3' members to form sides and remaining 2'9" member for the base; screw together with 3-1/8" screws (toe-in screws at a diagonal into top plate from side members) |
| + | [* black] Screw one stud (60-5/8") to either side of window box; letting top of studs hang free off the top of the window box but making sure they are all aligned at the bottom |
| + | [* black] Toe-in center vertical above window box |
| + | [* black] Place top and bottom plate such that vertical studs at edges leave a gap of 7" to one side of window, and 2-3/4" on the other. |
Image 1
No previous image
Added