Changes to Step #3
Edit by Workshop One —
Edit approved by Workshop One
- Before
- After
- Unchanged
Step Lines
| + | [* black] ***Exterior Sheathing for Module 1a*** |
|---|---|
| + | [* black] Cut the 3/4" OSB at 3' parallel to the short side of the piece to keep the rest for future use for Mod. 1b and the small 1" wide pieces in this module |
| + | [* black] Cut the 17 degree angle on the 3' piece by marking the two vertical distances and snapping a guide chalk line to connect the two. |
| + | [* black] repeat above procedure for the smaller piece of module |
| + | [* black] ***remember that the "scraps" from this 3/4"x4'x8' sheet will be used for the exterior sheathing for Mod. 1b*** |
Image 1
No previous image
Added
Image 2
No previous image
Added