Changes to Step #4
Edit by Chris Reinhart —
Edit approved by Chris Reinhart
- Before
- After
- Unchanged
Step Lines
| + | [* black] Next, we are creating the "rim joists." Two of these are used for the module w/o the notch, and one is used for the module with the notch. |
|---|---|
| + | [* black] Gather all three of your 5' - 11 1/4" boards together. Mark all three of them as you see in the image on the left. |
| + | [* black] ADD PICTURES SHOWING PROPER PROCEDURE FOR LAYOUT WITH A SPEED SQUARE AND TAPE MEASURE. |
| + | [* black] Put one of these back with the stack of pieces for the notched module. Keep the other two available for the next step. |
Image 1
No previous image
Added