Changes to Step #3
Edit by Chris Reinhart —
Edit approved by Chris Reinhart
- Before
- After
- Unchanged
Step Lines
| [* black] ***ABSOLUTELY CRITICAL QUALITY CONTROL STEP.*** | |
| [* black] Measure the diagonals between outside corners of the CEBs. The measurement should be 19' - 9 1/2". For quality control, you can be no more than 1/4" off from this measurement. | |
| [* black] As you start each course, you will measure both diagonals, as shown in Image 1. You will also measure the outside-to-outside length of the straight sides, as shown in Image 2. The length of each side must remain at 14' every course, with a tolerance of 1/4" or less. | |
| + | [* black] NEED PHOTO HERE OF CHECKING DIAGONALS ON FIRST COURSE TO REPLACE THIS PHOTO. |