Changes to Step #4
Edit by Chris Reinhart —
Edit approved by Chris Reinhart
- Before
- After
- Unchanged
Step Lines
| + | [* black] Build the small box as shown in Image 1 at left. |
|---|---|
| + | [* black] You will be screwing through the 3' - 3" boards and into the 3' - 6" boards. ***Pre-drill two holes through each end of the 3' - 3" boards so that you don't split them.*** Use 3" long screws for the attachments. |
| + | [* black] Once all four pieces are attached together, square the frame by measuring the two diagonals and making adjustments until they are equal. Then, brace the frame by screwing a diagonal piece onto the back as shown. ***Double-check your diagonals and make sure that the frame did not come out of square as you braced it.*** |
Image 1
No previous image
Added