Changes to Step #2
Edit by Chris Reinhart —
Edit approved by Chris Reinhart
- Before
- After
- Unchanged
Step Lines
| + | [* black] Create the plywood pieces for the module. |
|---|---|
| + | [* black] Begin by ripping the 5/8" plywood into 12" wide strips on the table saw. |
| + | [* black] Then, cut your strips to length as shown in the image. |
| + | [* black] The four strips shown in the image are for one module. Since we'll be building two modules, you will need to make two sets of these pieces. |
Image 1
No previous image
Added