Changes to Step #7
Edit by Chris Reinhart —
Edit approved by Chris Reinhart
- Before
- After
- Unchanged
Step Lines
| + | [* black] In this step you will build and insert the header at the top of the frame. |
|---|---|
| + | [* black] The header is made of two 2x4s with 1/2" sheet material sandwiched in between them. See image 2 for a close-up of the header. |
| + | [* black] First, fit the pieces together so that they are all flush with each other. Use clamps or a partner to hold them in place. |
| + | [* black] Screw them together with pairs of 3" screws - one pair on each end and one pair in the middle. |
Image 1
No previous image
Added