Changes to Step #4
Edit by Chris Reinhart —
Edit approved by Chris Reinhart
- Before
- After
- Unchanged
Step Lines
| - | [* black] Download the Sketchup (skp) file of the MH 2 Door Module here: http://opensourceecology.org/wiki/File:M... |
|---|---|
| - | [* black] Use the scene tabs at the top in the model to see the various steps in the assembly process. |
| + | [* black] The first part of assembly is to create the frame as seen in the image on left. |
| + | [* black] ***Pay special attention to how the pieces come together on the corners.*** |
| + | [* black] You will screw down through the top pieces into the side pieces. Pre-drill two holes on each side for these attachments. Make sure to keep the boards flush with each other other you make the connections. Use 3" screws for these connections. |
| + | [* black] On the bottom, you will screw through the sides of the long pieces and into the bottom piece. Again, you will use 3" screws for these connections. |
Image 1
Old Version
New Version