Changes to Step #3
Edit by Chris Reinhart —
Edit approved by Chris Reinhart
- Before
- After
- Unchanged
Step Lines
| [* black] The image shows the plywood pieces needed to make the door module. | |
| - | [* black] CUT LIST |
| - | [* black] 2 @ |
| - | [* black] 1 @ |
| + | [* black] ***CUT LIST - NOTE DIFFERENCES BETWEEN IMAGE AND LIST - FOLLOW LIST, NOT IMAGE!*** |
| + | [* black] 2 @ 11 3/8" wide x 8' long |
| + | [* black] 1 @ 11 3/8" wide x 3' 9 1/2" long |
| [* black] First, rip the plywood into 12" wide strips using the table saw. | |
| [* black] Then, measure and mark the lengths onto the 12" wide strips. | |
| [* black] Cut the strips to length with your circular saw. |